DESCRIBE

SP30-5 differential pressure transmitter has two types: intrinsically safe type and flameproof type (in accordance with ATEX standard), supporting 4... 20mA, 4... 20 mAHART and PROFIBUS. PA or FOUNDATION Fieldbus ™ The output signal can meet the corresponding application requirements. All electronic components of these two types of transmitters (even flameproof type) are intrinsically safe. Therefore, when the instrument is in working state, it can be adjusted in EX area. The shell is mainly made of plastic, aluminum and stainless steel for different operating environments. For food and pharmaceutical industries with high application requirements, electropolished stainless steel (316L) housings are also available. Easy to configure and operate The user can configure and maintain the instrument through the display with operation module (optional). The operation menu has a reasonable structure, is simple and easy to understand, and has a variety of optional languages. In addition, the user can use the configuration software to set the operating parameters. The instrument specific DTM can easily integrate the instrument into the corresponding distributed control system. Widely used SP30-5 is applicable to many industrial measurement occasions. After installing diaphragm seal, SP30-5 is also applicable to severe process conditions. The instrument can The measuring range is from 0... 1kPa to 0... 4MPa, and the static pressure limit is 16MPa. Therefore, the instrument is almost suitable for all applications where the combination of internal digital signal processing and mature sensors can ensure high accuracy and optimal long-term stability. SP30-5 differential pressure transmitter integrates the highest accuracy and simple operation, and is used to measure the differential pressure of gas, steam and liquid. The integrated LCD displays the measured values and equipment data. The explosion-proof type "Ex ia" allows the equipment to be installed in Zone 0. The housing and sensor are made of high-grade stainless steel. Diaphragm seals can also be used for specific process technology applications. The device is programmable, so it is easy to adapt to various measurement tasks. An easy-to-use setup program can be used as an attachment to initiate operations through the interface. The rotating key makes the on-site manual operation very convenient and fast. According to DIN EN 61508/- 1/- 2, version 2.0, with 4 to 20mA and HART ® The pressure transmitter of the protocol shall be evaluated for safety function and certified by T ｜ V Nord. These measuring devices are suitable for monitoring process liquid level and pressure up to SIL2.