describe

SP10 pressure transmitter has two versions: intrinsic safety type and explosion-proof enclosure ignition protection type (conforming to ATEX and IECEx), and both versions support 4... 20mA, 4... 20mA HART, PROFIBUS, PA or FOUNDATION Fieldbus ™ The output signal can meet the relevant applications with high requirements for measurement technology. The housing can rotate 330 ° freely and is made of plastic, aluminum and stainless steel. For food industry and pharmaceutical industry with high application requirements, electrolytic polished stainless steel (316L) shell can also be provided. Rugged and accurate Ceramic capacitance measuring elements provide highly accurate measurement values, especially in the case of small measurement range. Due to the special sealing concept, the instrument is applicable to almost all industries and applications. A variety of different enclosures are available for different operating environments. Easy to configure and operate The user can configure and repair the instrument through the display (optional) and operation module, of which the operation module can be installed in four different positions. The operation menu structure is simple and clear, and supports multiple languages (optional). In addition, the user can also use software to set operating parameters, and the instrument specific DTM can easily integrate the instrument into the corresponding process control system. With HART ® The interface pressure transmitter combines the highest accuracy and simple operation, and is used to measure the gauge pressure or absolute pressure of gas, steam and liquid. The integrated LCD displays the measured values and equipment data. The pressure transmitter with flameproof enclosure can be installed in Zone 0. The housing and sensor are made of high-grade stainless steel. A variety of embedded process connections can meet sanitary requirements, including PECK connection systems. Diaphragm seals can also be used for specific process technology applications. The transmitter is programmable, so it is easy to adapt to various measurement tasks. An easy-to-use setup program is used as an attachment to initiate operations through the interface. The rotating key makes the on-site manual operation very convenient and fast. With 4 to 20 mA and HART according to DIN EN 61508/- 1/- 2 version 2.0 ® The pressure transmitter of the protocol shall be evaluated for safety function and certified by T ｜ V Nord. These measuring devices are suitable for monitoring process liquid level and pressure up to SIL2.